3D Printing Capabilities, Accuracy & Tolerances

This page outlines our 3D printing capabilities, accuracy expectations, and production limits to help you determine whether 3D printing is suitable for your application.

View materials & tolerances

Maximum Build Size

Small to medium parts produced in a single piece
Larger parts can be split and bonded if required
Seam placement considered during design

Accuracy & Repeatability

Typical accuracy: ±0.2 mm
Repeatability maintained across batch runs
Critical dimensions prioritised where required
Profiles stored for repeat orders

Layer Heights & Resolution

Standard layers: 0.2–0.28 mm
Fine layers available for detailed parts
Smaller layers increase print time, not strength
Surface finish varies by material

Infill & Internal Structure

Infill range: 15% – 100%
Structural strength achieved via geometry
Solid infill used only where required
Infill type selected per application

Material-Dependent Behaviour

PLA: highest dimensional stability
PETG: tougher, slightly more flexible
ABS: heat-resistant, more movement during cooling
Nylon: strong, moisture-sensitive
Carbon-filled: stiff, highly stable, matte finish

Material Information Page

Quality Control

Visual inspection before dispatch
Dimensional checks on critical features
Failed prints are not shipped
Files retained for repeat jobs

Production & Lead Times

One-off and small batch production
Consistent results across repeat runs
Rapid turnaround available
Reorders produced from stored profiles

Engineering-grade options

ABS, Nylon, and carbon-filled materials

For parts that must survive heat, vibration, and real use, engineering filaments outperform PLA/PETG. If you need higher stiffness, better wear, or improved dimensional stability, carbon-filled materials are often the best step up.

Accurate. Repeatable. Production-ready.

Capabilities + Ordering FAQs

Do you offer bulk or repeat pricing?

For ongoing production or repeat orders, we can offer optimised pricing and consistent print profiles.

Can I reorder a previous job easily?

Yes. Previous jobs can be reordered using the same settings for consistent results.

How does instant quoting work?

Upload your file, choose material and settings, and pricing updates instantly based on volume, print time, and material.

How accurate are carbon-filled prints?

Carbon-filled prints are highly dimensionally stable and well-suited to repeatable functional parts, though they require careful design due to reduced layer flexibility.

Can you print one-off parts as well as small batches?

Yes. We support both one-off prototypes and short-run production without tooling costs.

Contact Us Today

Call Us On

0131 463 6111

Email @

[email protected]