Yes. We can adjust wall thickness, fillets, tolerances, and orientation to improve print success and performance.

Orientation affects strength, surface finish, and accuracy. Parts should be designed with load direction and layer adhesion in mind.

No. Printed holes typically print slightly undersized. We recommend allowing clearance or post-processing where precision is required.

As a general guide, walls should be no thinner than 1.2–1.6 mm depending on material. Thicker walls improve strength and print reliability.

Yes. We provide in-house CAD design and modification services, including design for additive manufacturing (DfAM).

We accept STL and STEP files. STEP files are preferred for complex or tolerance-critical parts as they retain true geometry.