Vehicle Graphics & Wraps in Edinburgh

Is Your Vehicle Working as Hard as You Are?

Get a Quote

Vehicle Graphics & Wraps in Edinburgh

Is Your Vehicle Working as Hard as You Are?

Get a Quote

Vehicle Graphics & Wraps in Edinburgh

Is Your Vehicle Working as Hard as You Are?

Get a Quote

Get Your Brand on the Move: Vehicle Wraps & Signage in Edinburgh

Stop driving a blank canvas. Start driving more business.

Your vehicle is one of the most underused marketing assets in your business. Done properly, vehicle graphics generate thousands of daily impressions and pay for themselves quickly.

We produce and install high-quality vehicle graphics for businesses across Edinburgh — from simple cut vinyl lettering through to full wraps and fleet branding.

Everything is produced in-house using commercial-grade materials, ensuring consistent colour, durability, and clean installation.

WHAT WE OFFER

Vehicle Graphics Services

Cut Vinyl Lettering
Clean, cost-effective branding using precision-cut vinyl. Ideal for logos, contact details, and simple designs.

Partial Wraps
Printed graphics applied to selected panels. A strong visual impact without the cost of a full wrap.

Full Vehicle Wraps
Complete transformation of your vehicle using printed and laminated wrap vinyl.

Fleet Graphics
Consistent branding across multiple vehicles. Designed for scalability and repeatability.

Magnetic Vehicle Signs
Removable branding for temporary use.

PRICING GUIDE

Typical Pricing

Cut vinyl lettering: Starting £250
Partial wraps: Starting £850
Full wraps: From £1,700+

Pricing depends on vehicle size, coverage, material, and installation time.
Accurate quotes are provided once we review your vehicle and requirements.

PROCESS

How It Works

1. Send Your Details
Upload photos of your vehicle and outline what you need.

2. Quote & Scope
We assess the job and provide a clear quote.

3. Design (if required)
We prepare artwork or work from your supplied files.

4. Production
Graphics are printed, laminated, and prepared in-house.

5. Installation
Installed professionally for a clean, long-lasting finish.

MATERIALS & QUALITY

Built to Last

We use professional-grade vinyl systems designed specifically for vehicle applications.

Premium vinyl from leading manufacturers (e.g. 3M, Avery Dennison)
Laminated prints for UV and abrasion resistance
Designed for clean removal without damaging paintwork
Suitable for long-term outdoor use

We do not use low-grade materials — failure here leads to peeling, shrinkage, and poor finish.

Vehicle Sign Writing

High-impact, low-cost

Turn Your Van Into Your Best Salesperson

Why drive a blank canvas when you could be generating leads? Vehicle sign writing is the most cost-effective way to advertise. Whether you’re parked on a job site in Leith or driving through the city centre, your brand is working 24/7.

Get Started

Partial Vehicle Wraps & Graphics

Built for the Scottish Elements

High-impact branding for sides and rear doors.

Not every business needs a 100% colour change. Partial vehicle wraps allow you to combine high-resolution printed imagery with your vehicle’s original paintwork.

Get Started

Full Vehicle Wraps

Total Transformation

100% coverage, 100% impact.

When “subtle” just won’t cut it, a full vehicle wrap is the answer. We wrap every visible inch of your vehicle’s painted surface in high-performance cast vinyl.

Get Started

Vehicle Colour Change Wraps

Tired of the factory finish?

Give your car a bespoke new look with a premium vinyl overhaul.

Why settle for the same silver or black as everyone else on the bypass? A colour change wrap allows you to completely redefine your vehicle’s personality without the permanence (or the price tag) of a respray.

Get Started

Can you print replacement flyers during the Fringe?

Yes. We can print replacement flyers during the Fringe if you run out, change show details, add dates,
update artwork or need extra promotional material quickly. For time-sensitive reprints, send us the final
artwork and contact us before ordering so we can confirm production time.

Can you print QR code posters for ticket links?

Yes. We can print QR code posters that link directly to ticket pages, show listings, review pages, websites
or social media profiles. Before printing, we recommend checking that the QR code scans correctly and
points to the correct live page.

Do you print A3 and A2 Fringe posters?

Yes. We print A3 and A2 posters for Edinburgh Fringe shows, venues and promoters. A3 posters work
well for venue walls, cafes, bars, noticeboards and indoor displays. A2 posters are larger and more
visible, making them useful for venues, entrances and higher-impact promotion.

What size flyers should I order for the Edinburgh Fringe?

A6 flyers are the most common choice for Fringe handouts because they are compact, easy to carry and
cost-effective for high-volume promotion. A5 flyers give you more space for show details, reviews,
images and QR codes, so they can work better for theatre, comedy, cabaret and premium show
promotion

Can you deliver to my Fringe venue?

Yes, we can arrange delivery to Edinburgh venues where possible. Delivery depends on the location,
order size, production schedule and access details for the venue. For urgent venue deliveries, contact us
before placing the order so we can confirm availability.

Can I collect my Fringe print in Edinburgh?

Yes. You can collect your Fringe flyers, posters, banners and signs from our Edinburgh production unit.
Collection is available Monday to Friday, usually between 10:00am and 4:00pm. If you are travelling to
Edinburgh for the Fringe, you can order before you arrive and arrange collection once the print is ready

How quickly can you print Fringe flyers in Edinburgh?

We offer fast turnaround options for Fringe flyers, including same-day and 24-hour printing where
possible. Same-day production depends on the order size, artwork being print-ready, and when the
order is placed. For urgent Fringe jobs, contact us before ordering so we can confirm the fastest
available option.

Where are you based and what areas do you cover?

We are based in Edinburgh and cover the surrounding areas including Leith, Musselburgh, Dalkeith and beyond. For larger projects or fleets, wider travel can be arranged.

Do you work with individuals or businesses only?

Both. Most of our work is commercial branding, but we also work with individuals looking for custom graphics.

Can you match my existing branding?

Yes. We match colours, fonts, and layout based on your brand guidelines or existing materials to ensure consistency across your vehicles and other marketing.

Do you offer both design and installation?

Yes. We can handle the full process from design through to print and professional installation. If you already have artwork, we can work from your files.

What’s the difference between vehicle graphics and a full wrap?

Vehicle graphics typically refer to lettering or partial coverage, while a full wrap covers most or all painted surfaces of the vehicle. Full wraps are more expensive and used for complete visual transformation.

What are vehicle graphics?

Vehicle graphics are vinyl-based designs applied to a vehicle’s surface for branding, advertising, or aesthetic purposes. This includes cut vinyl lettering, partial wraps, and full wraps depending on coverage and design complexity.

Can I request a proof?

Digital proofs may be available for certain products. Physical proofs are not standard unless specifically requested.

Are slight size or colour variations normal?

Yes. Minor tolerances are inherent in print production and do not constitute defects.

What if there is a printing error?

If the fault is due to production error, contact us with clear photographs and details. Each case is assessed individually.

What if I make a mistake in my order?

If production has not started, contact us immediately. If printing has begun, responsibility lies with the customer.

Can I cancel an order?

Orders can only be cancelled before production. Costs incurred up to that point may still apply.

Can you deliver to multiple addresses?

Split deliveries may be possible but usually require separate orders or additional charges.

Are delivery dates guaranteed?

Delivery dates are estimates. Courier delays are outside our control and do not constitute a production fault.

Can I collect my order?

Local collection may be available by arrangement. You will be notified when your order is ready.

Do you offer delivery across the UK?

Yes. UK-wide delivery is available for most products.

Are turnaround times guaranteed?

Turnaround times are targets, not guarantees. Delays caused by artwork issues, late approvals, or external factors may affect delivery.

Can you offer express or same-day printing?

Some products support expedited production. Availability depends on workload and specification.

What are your standard turnaround times?

Turnaround times vary by product and specification. Production time does not include delivery unless stated.

When does production start?

Production begins once:

Payment is received
Artwork is approved and print-ready

Can you design artwork for me?

Yes. Design services are available for an additional cost. This must be arranged before production begins.

What happens if my artwork is incorrect?

If an issue is detected before printing, you may be contacted. If artwork is approved and printed as supplied, errors are the customer’s responsibility.

Do you check artwork before printing?

Basic checks are carried out for size, bleed, and obvious errors. Artwork is printed as supplied unless a design or pre-press service is purchased.

What file formats do you accept?

Preferred formats are print-ready PDF files. High-resolution TIFF or JPEG files may also be accepted depending on the product.

Are setup costs included in the price?

Standard setup is included unless otherwise stated. Additional pre-press or design work may incur extra charges.

Do prices reduce at higher quantities?

Yes. Many products benefit from lower unit costs at higher quantities due to production efficiencies.

Do you charge VAT on all print products?

Most print products are subject to VAT. Some items, such as printed materials for registered charities, may be zero-rated if eligibility criteria are met.

Are prices shown including VAT?

Prices are shown excluding VAT unless otherwise stated. VAT is applied at checkout where applicable.

Can I reorder a previous job?

Yes. Reorders are possible if the specification and artwork remain unchanged and files are still available.

Is there a minimum order quantity?

Minimum quantities vary by product and production method. Some products allow single-unit orders, while others require a minimum run.

Can I place an order without finished artwork?

Yes. You can place an order and upload artwork later, provided this does not delay production beyond the agreed turnaround.

Do I need to place an order online, or can you quote manually?

Most products can be ordered directly online. For complex, custom, or large-format jobs, manual quotes are available on request.

Is my artwork kept confidential?

Yes. Customer files are treated as confidential and used only for production purposes.

How long do you keep my artwork files?

Files are retained for a limited period. Long-term storage is not guaranteed unless agreed in advance.

Can you white-label orders?

White-label or unbranded dispatch may be available by arrangement.

Do you offer bulk or contract pricing?

Yes. High-volume or repeat customers can request bespoke pricing.

Do you offer trade accounts?

Trade accounts may be available for approved businesses. Terms and pricing are agreed separately.

Can you advise on recyclable or eco-friendly options?

Yes. Contact us for guidance on suitable materials and finishes.

Do you use environmentally responsible materials?

Where possible, FSC-certified and environmentally conscious materials are used. Availability varies by product.

Can I change my order after placing it?

Changes are only possible before production begins. Once printing has started, changes cannot be made.

Do you offer delivery across the UK?

Yes. UK-wide delivery is available for most products.

Can I change the design slightly on a reorder?

Any artwork change creates a new print job and may affect pricing and turnaround.

Can you reprint flyers from a previous order?

Yes, provided the artwork and specification remain unchanged and files are still available.

Will colours match my screen exactly?

No. Screens display RGB colour, while flyers are printed in CMYK. Colour variation is normal and not considered a fault.

Can I get a proof before printing?

Digital proofs may be available on request. Select checks with print proofs in the artwork options
Physical proofs are not standard for flyers.

Do you check artwork before printing?

Basic checks are carried out for size and bleed, but artwork is printed as supplied. Full design or pre-press correction is not included unless stated.

Can flyers be written on?

Uncoated flyers are best for handwriting.
Silk and gloss papers are less suitable for pens and markers.

Are flyers suitable for outdoor use?

Standard flyers are intended for indoor or short-term outdoor use.
For long-term outdoor exposure, consider waterproof or synthetic stocks.

Are flyers trimmed to size?

Yes. Flyers are guillotine-trimmed to the finished size after printing

Can flyers be laminated?

Lamination is not standard for flyers.
For laminated items, consider thicker stocks or leaflet products.

Are flyers supplied folded?

Flyers are supplied flat by default.
If you need folded leaflets, this is a different product specification.

What quantities can I order?

Flyers are available in a wide range of quantities, from small short runs to large bulk orders. Available quantities depend on size and stock.

Can I mix designs in one flyer order?

Each unique design is treated as a separate print job. Mixing designs in one run is not supported unless explicitly stated.

Does the price per flyer reduce at higher quantities?

Yes. Unit cost decreases as quantity increases, especially on litho-printed runs.

What bleed do flyers need?

Flyers require 3mm bleed on all edges.
For example, an A5 flyer should be supplied at 154 × 216mm, not 148 × 210mm.

What is a flyer?

A flyer is a single-sheet printed product, typically used for promotions, events, menus, handouts, or mail drops. Flyers are usually printed on lightweight to medium-weight paper and are supplied flat.

Are flyers printed digitally or litho?

Short runs are typically printed digitally
Larger runs may be litho printed for cost efficiency and consistency

The method is chosen based on quantity and specification.

Do flyers need a safe margin?

Yes. Keep important text and logos at least 5mm inside the finished trim edge.

What file formats do you accept?

Preferred formats:

PDF (print-ready)
TIFF
High-resolution JPEG

Avoid Word, PowerPoint, or low-resolution images.

How should I set up artwork for flyers?

Artwork should be supplied:

At final print size
With 3mm bleed on all sides
With crop marks
At 300dpi
In CMYK colour mode

Are flyer colours printed in CMYK?

Yes. All flyers are printed using CMYK colour process. RGB artwork will be converted automatically, which may result in colour shifts.

What’s the difference between silk, gloss, and uncoated paper?

Gloss: High shine, vibrant colours, less writable
Silk: Smooth, low-sheen, professional finish
Uncoated: Matte, easy to write on, more muted colours

What paper stocks are available for flyers?

Typical flyer stocks include:

130gsm silk or gloss
170gsm silk or gloss
250gsm silk or gloss
Uncoated paper (for writing)

Heavier stocks feel more premium but cost more.

Are flyers printed single- or double-sided?

Flyers can be printed:

Single-sided (one side printed)
Double-sided (both sides printed)

You can choose this when configuring your product.

What sizes do you offer for flyers?

Common flyer sizes include:

A6 (105 × 148mm)
DL (99 × 210mm)
A5 (148 × 210mm)
A4 (210 × 297mm)

Custom sizes are available on request.

Are parts inspected before dispatch?

Yes. All parts are visually checked and inspected for obvious dimensional or print defects before dispatch.

Is post-processing included?

Basic support removal and clean-up are included. Advanced finishing can be discussed if required.

Do you ship UK-wide?

Yes. All parts are packed securely and shipped with tracked UK delivery.

Do you offer bulk or repeat pricing?

For ongoing production or repeat orders, we can offer optimised pricing and consistent print profiles.

Can I reorder a previous job easily?

Yes. Previous jobs can be reordered using the same settings for consistent results.

How does instant quoting work?

Upload your file, choose material and settings, and pricing updates instantly based on volume, print time, and material.

How accurate are carbon-filled prints?

Carbon-filled prints are highly dimensionally stable and well-suited to repeatable functional parts, though they require careful design due to reduced layer flexibility.

Can you print one-off parts as well as small batches?

Yes. We support both one-off prototypes and short-run production without tooling costs.

What is the maximum build size?

Maximum build size depends on material and printer configuration. Large parts may be split and bonded where required.

Are repeat prints consistent?

Yes. We use controlled print profiles and calibrated machines to ensure consistency across repeat runs and small batches.

What tolerances can you achieve?

Typical tolerances are ±0.2 mm, depending on geometry, material, and orientation. Critical dimensions should be discussed in advance.

Can you modify files before printing?

Yes. We can adjust wall thickness, fillets, tolerances, and orientation to improve print success and performance.

How should parts be oriented for printing?

Orientation affects strength, surface finish, and accuracy. Parts should be designed with load direction and layer adhesion in mind.

Should holes be designed to final size?

No. Printed holes typically print slightly undersized. We recommend allowing clearance or post-processing where precision is required.

What wall thickness should I design for?

As a general guide, walls should be no thinner than 1.2–1.6 mm depending on material. Thicker walls improve strength and print reliability.

Do you offer CAD or design support?

Yes. We provide in-house CAD design and modification services, including design for additive manufacturing (DfAM).

What file types do you accept?

We accept STL and STEP files. STEP files are preferred for complex or tolerance-critical parts as they retain true geometry.

Are material prices reflected accurately in the quote?

Yes. Pricing is material-accurate. Selecting a different material updates the price instantly to reflect material cost, print time, and wear on equipment.

Can you advise which material is best for my part?

Yes. If you’re unsure, we can recommend a material based on load, temperature, environment, and how the part will be used.

What are specialist filaments?

Specialist filaments include materials such as wood-filled, metal-filled, flexible blends, and aesthetic composites. These are typically chosen for visual, tactile, or niche functional requirements rather than pure mechanical strength.

Is carbon-filled filament stronger than standard plastics?

Carbon-filled filament is stiffer and more dimensionally stable than standard plastics, but it can be more brittle. It is ideal where rigidity matters more than impact resistance.

What is carbon-filled filament best used for?

Carbon-filled filaments are used for parts requiring increased stiffness, dimensional stability, and reduced flex. They are commonly chosen for brackets, housings, jigs, and performance-critical components.

What materials do you offer for 3D printing?

We offer PLA, PETG, ABS, Nylon, carbon-filled filaments, and specialist materials such as wood-filled and other composite blends. Each material is selected based on strength, heat resistance, and functional requirements.

Is the cheapest material always best?

No. Material choice affects lifespan, performance, and repeatability.

Can you recommend a material for my application?

Yes. We review use-case, geometry, and environment before printing.

Can the same design be printed in multiple materials?

Yes. This is common during prototyping.

How do I choose the right material?

Start with how the part will be used: load, heat, environment, and appearance.

Are metal-filled parts stronger?

No. Strength is similar to standard plastics.

What are metal-filled prints used for?

Display parts, visual prototypes, and weighted components.

Are metal-filled prints actually metal?

No. They are plastic with metal powder for weight and appearance.

Are wood-filled parts structural?

No. They are for visual or light-duty use only.

Do wood-filled prints look like wood?

Yes. They have a natural wood-like texture and appearance.

What are wood-filled materials for?

Decorative parts, display models, and aesthetic components.

Is TPU waterproof?

Yes. TPU is suitable for wet environments.

Is TPU durable?

Yes. TPU is highly impact-resistant and abrasion-resistant.

How flexible is TPU?

TPU ranges from rubber-like to semi-rigid depending on formulation.

What is TPU used for?

Flexible parts such as gaskets, seals, vibration dampers, protective covers, and flexible mounts.

Is nylon good for moving parts?

Yes. Nylon’s wear resistance makes it excellent for moving or sliding components.

Is surface finish affected?

Yes. Carbon-filled prints have a matte, technical finish and slightly reduced fine detail.

Are carbon-filled materials abrasive?

Yes. They are abrasive and require hardened nozzles.

Are carbon-filled prints electrically conductive?

No. The fibres increase stiffness, not conductivity.

Do carbon-filled parts flex?

Very little. They are designed to resist bending.

Are carbon-filled parts stronger than nylon?

They are stiffer but not more impact-resistant. Carbon improves rigidity, not toughness.

What are carbon-filled materials best for?

Jigs, fixtures, brackets, tooling, and structural prototypes requiring rigidity.

What is carbon-filled filament?

Carbon-filled materials are reinforced with carbon fibres to increase stiffness and dimensional stability.

How accurate is nylon printing?

Nylon requires design allowances but can produce reliable functional parts when designed correctly.

Is nylon waterproof?

Nylon absorbs moisture over time, which can slightly affect dimensions and stiffness.

Does nylon handle heat well?

Yes. Nylon performs well at higher temperatures than PLA or PETG.

Is nylon flexible?

Yes. Nylon has natural flexibility, making it resistant to cracking.

Is nylon stronger than ABS?

Yes. Nylon offers higher toughness and fatigue resistance.

What is nylon best used for?

Nylon is ideal for functional, mechanical parts such as gears, hinges, bushings, brackets, and wear components.

Can ABS be post-processed?

Yes. ABS sands well and can be chemically smoothed for a glossy finish.

How accurate is ABS printing?

ABS is accurate but slightly less dimensionally stable than PLA.

Does ABS warp?

ABS can warp during printing, especially on large flat parts. Proper design and controlled printing are important.

Is ABS strong?

ABS is tough and impact-resistant but not as stiff as PLA.

Is ABS suitable for outdoor use?

Not ideal. ABS degrades under UV unless coated or painted.

Is ABS heat resistant?

Yes. ABS handles higher temperatures than PLA and PETG.

What is ABS commonly used for?

ABS is used for enclosures, brackets, housings, clips, and parts exposed to moderate heat.

Can PETG be post-processed?

Yes, though it is harder to sand cleanly than PLA.

How accurate is PETG printing?

PETG is accurate but slightly less dimensionally stable than PLA. Tolerances should allow small variation.

Does PETG flex?

Yes. PETG has some flexibility, which helps absorb impact and reduces cracking.

Is PETG good for outdoor use?

Yes. PETG has good UV and moisture resistance, making it suitable for outdoor and semi-outdoor parts.

Does PETG handle heat well?

PETG performs better than PLA but is not a high-temperature material. It is suitable for warm environments but not extreme heat.

What is PETG best used for?

PETG is ideal for functional parts that need toughness, slight flexibility, and better environmental resistance than PLA.

Is PETG stronger than PLA?

PETG is tougher and more impact-resistant but slightly less stiff than PLA.

Can PLA be post-processed?

Yes. PLA can be sanded, filled, primed, and painted easily.

Is PLA waterproof?

PLA is moisture-resistant but not waterproof over long periods.

How accurate is PLA printing?

PLA offers excellent dimensional accuracy and is ideal when tight tolerances and sharp detail are required.

Is PLA good for outdoor use?

No. PLA degrades with UV exposure and heat and is not recommended outdoors.

Is PLA heat resistant?

No. PLA softens at relatively low temperatures (around 55–60 °C). It is not suitable for hot environments, car interiors, or near motors.

Is PLA strong enough for functional parts?

PLA is stiff but brittle. It works for light-duty functional parts but is not suitable for impact, flexing, or load-bearing applications.

What is PLA used for?

PLA is best for prototypes, visual models, jigs, fixtures, and parts where dimensional accuracy and surface finish matter more than heat or impact resistance.

What are your same-day and next-day cut-off times?

Order by 1:00pm for same-day production (subject to workload/stock). Orders placed after 1:00pm are usually scheduled for next-day. If it’s urgent after 1pm, call 0131 463 6111 and we’ll try to fit it in.

Design Service

No Graphics Experience Necessary!

Professional Design Service

Save yourself the hard work and let us handle the artwork. Here at Edinburgh Banners, we take pride in our vibrant prints and impactful design. If you are short of time, or just want a cracking print, we’ll create your vibrant artwork.

Price Promise

We Won't Be Beaten on Price!

Price Promise

Edinburgh Banners matches all like-for-like pricing across the UK. Send us a link or a quote and we’ll make you the best deal in the country.

Delivery

UK Delivery & Edinburgh Collection

Delivery Times

We deliver throughout the UK and offer collection from our Edinburgh workshop. Delivery options and estimated dates are shown at checkout after the selected production turnaround.

Edinburgh banners being printed in a workshop for custom outdoor advertising solutions.

WHY CHOOSE US

Production-Led Approach

Most competitors outsource or cut corners. We don’t.

In-house production control
Colour consistency across jobs and fleets
Experienced with large-format printing systems
Fast turnaround without sacrificing quality

You’re dealing directly with the people producing and installing the work.

Or give us a call on 0131 463 6111 and chat with our friendly team today.